Rubies and More knockoff (a tutorial)

This necklace was a special request by a friend who was gracious enough to take some pictures for my shop with her fancy camera. As compensation, I told her I'd make her anything she wanted, and she chose this beauty.

The {Rubies and More} necklace from {Sundance}. Sadly, it's no longer available, but I AM going to teach you how to make it so that should make up for it! I think it turned out really nicely.

I altered it a little bit according to what she wanted, like adding an extender chain. Want to make one yourself?

You will need:

• Side drilled, tear drop shaped red beads. I needed two strands
• Flat, coin shaped silver beads
• Shiny faceted silver beads
• Tiny little pearls
• Extender chain
• Lobster clasp
• Thin cord. I used cotton cord but the original necklace uses leather.
• Fray check (if using cotton cord)
• E6000
• Jump rings
• Tiger tail or other stringing material
• Crimp beads
• Crimping tool

Yikes, that's a lot. Got it all?

Whenever I string beads, I always string directly onto the spool or tiger tail to make sure that I don't run out of material. String on about 15-20 red beads. Then alternate flat beads with pearls so that you end up with three silver beads and two pearls (I changed it after I took the pic.) Then strong on three more red beads.

Next, we need to finish this part of the necklace. String on a crimp bead and then a jump ring to the loose end of the tiger tail.

String the end back through the crimp bead, like so. Push the crimp bead up to close up that gap, you want the crimp bead to be close to the jump ring.

To use the crimp tool, line the crimp bead up into the second section of the crimp tool. Just look at the picture, because I know I didn't explain that well.

Squish it down.

Open it up again, and position the now squished crimp bead into the first section of the tool. See how it got smushed into a C shape? You want it to then be smashed on top of itself again. Think of it as a double knot.

Smush it. Now it's nice and secure.

This is what it should look like finished. Push all the beads up against the crimp bead (make sure to thread it through both strands of tiger tail). Now we'll do it to the other side.

Now you can cut off the strand of beads from the spool. Start off the same way as you did on the other side.

However, on this side, you need to thread that extra strand of tiger tail back through the beads. A little tricky!

Just pull it through the first bead or two, and keep pulling and adjusting until it's nice and tight. Then crimp it like you did on the other side. Does that make any sense at all? I'm no good with words. Thank you, pictures.

Now, the cord. Tie the cord around the jump ring.

I dabbed a drop of E6000 in the knot to make sure it didn't come undone. I also fray checked the ends when I cut it.

Divide those sparkly beads in half. String half of them onto one side, and half of them onto the other side. (After you've tied the cord on the other side, that is.)

It should look something like this. Tie a knot at the ends of the beads so that they don't slide around all over. Then, tie another loop at the end, just like you did with the jump ring.

Attach the lobster clasp to one side and the extender chain to the other. I added a silver bead to the end for decoration. If you were able to understand any of that, you should be done!!

Lay it out on some rocks in your backyard and take pictures of it. Or wear it, your choice. :)

Please let me know if you have any questions! I feel like this was more of a visual tutorial rather than a wordy one, so if you need more words, shoot me an email.

Solid perfume (a tutorial)

As promised, I present the tutorial for making solid perfume! I saw this on Pinterest a while ago and pinned it to my {Crafty things I need to do} board. And finally got around to trying it out!

{original pin here}

I searched and searched for a vintage pocket watch or locket to fill with perfume, but after a few weeks I became way too impatient and ended up picking one up for $5 from Michaels. Then I realized I had NONE of the ingredients I needed to make solid perfume. Argh. So I spent a few weeks researching and and comparing products and waiting for everything to come in the mail. Why I bought ingredients online and waited around for them to arrive escapes me. Wait, that's a lie. It's because it was much cheaper that way. Getting off topic...

Yay! If you follow me on {facebook} you're probably sick of seeing these, they are the newest addition to my shop! But they are so much fun (and addicting) to make, I thought I'd share the how-to as well!

To make solid perfume, you will need:

• Beeswax
• Carrier oil (I use a combo of sweet almond oil and coconut oil.)
• Essential oils
• Oral syringe (find it in the medicine aisle of the grocery store)
• Locket
• Old metal/glass bowl that you will never use for food again.
• Plastic spoon

I didn't really follow the pinned tutorial very well. I researched several different recipes and sort of mashed them together and came up with my own. Through experimentation, I discovered that a 1:1 beeswax/carrier oil made the best perfume base. Not too solid, not too lip balmy. Since I decided to use a combo of two different carrier oils (sweet almond and coconut) it comes out to be a 2:1:1 beeswax:sweet almond:coconut oil ratio.

 For this huge locket, I did a teaspoon of beeswax...

...and a half teaspoon of the oils. It ended up being way too much. 

Bring a small amount of water to a boil in a pot small enough to NOT let metal/glass bowl fit in. We're making a double boiler here. 

Combine all three into the bowl and place it on top of the boiling pot of water. The steam will quickly melt the three together. I mean in like less than a minute. 

Stir with the plastic spoon to combine. Stir really well, otherwise you'll end up with pockets of oil in the beeswax. Not cool. 

It really does melt fast! Stir, stir, stir, then turn the heat off. 

Add your oils. For this particular locket I used a headache relief blend (since I am an almost daily sufferer...) a 50/50 peppermint/lavender. Mix really well again, but do this quickly because the perfume will harden pretty quickly. The amount of essential oils added was different everywhere I looked, so I just had to wing it. I added about 25-30 drops total. 

Fill the oral syringe with your perfume. This makes it a lot easier to fill the locket. 

....though it's not a perfect science. 

Let the perfume harden for at least 15 minutes before disturbing it. (10 BFF points if you sang that.)

Then comes the fun part, turning it into something beautiful!

To apply solid perfume, rub your fingers on the perfume and smooth it onto your pressure points. Wrists, behind the ears, etc. Since I made this amazing headache relief batch, I massage it into my temples and at the nape of my neck to work in the magic. 

Another added bonus: Your body acts like a candle warmer. The heat from your body will release the oils in the locket and you will smell gorgeous all day. I've now made three of these for myself (and another half dozen that I've sold) and the scent really sticks with you. All in all, a wonderful pin. I hope you enjoy it! 

I'm linking this up to...

Because Becca inspired me to actually do one of my pins! And linking up to a few other fun {parties}

The "cheating" post, jewelry with buttons

I know, I know, the whole series was "Jewelry Making for the Non-Jewelry Maker" and it required no special tools or supplies. Well...these both have just a teensy bit of special supplies. But they were so easy to do I had to include them! You've still got a week left till Christmas! You can totally knock these out. Easy.

 The main ingredient of the jewelry today? Buttons. Yes, buttons. You'd be amazed at the buttons you can find these days, some of them don't look like buttons at all! Like that pretty pink pendant. Yes, it's a button, and this is the easiest necklace ever! Less than a minute to make.

You will need:

• Button
• Jump ring
• Premade necklace (you can find these at Hobby Lobby)

That's it! Wait for buttons to go on sale and you've got a majorly inexpensive present. To make one:

Take button off of paper. Open the jump ring, thread it through the button.

Attach it to the necklace. Close the jump ring. Told you it was easy!

And the results are lovely! Only hardcore Joann stalkers will ever know that you're wearing a button around your neck. Ready for some easy peasy earrings?

You will need:

• Small buttons
• Two earring posts
• Button shank removers (Six bucks at Joann in the button aisle. Bring your coupon)
• Hot glue gun (E6000 would be better)

This one is a teeny tiny itsy bitsy more tricky, but it'll still take you less than a minute to make!

Using the button shank removers, remove the shank of the button.

Bam. Now it has a flat back.

Do it again to another button so you can have a pair (unless you only have one pierced ear, in which case skip this step)

Bam. Pretty rose earrings on the cheap, no cabochons required. I'll spare you another picture of my face, you get the idea right?

I hope you enjoyed my little series! Remember, next month I am redoing "Jewelry Making 101" which should cover everything you ever wanted to know about making your own jewelry. Got a question? Shoot me an email and I'll cover it in the series.

Happy crafting!

Vintage style cuff

First things first, this idea isn't originally my own. It was inspired by {this} tutorial over at I Heart Naptime.

Mine's a little different though. When I saw this pretty pleated ribbon at Hobby Lobby the very first thing I thought of was "Oh!! That would make an awesome cuff!" And here we are. You wanna make one?

Uh, don't mind the pic, I changed my mind a lot while I was making this. So, besides the glue gun, heat sealer, and scissors, you will need:

• Pleated ribbon
• Ruffled velvet ribbon
• Buttons
• Velcro
• Satin ribbon

Just pretend everything is in the picture, mmkay?

Wrap the ribbon around your wrist and subtract an inch. Cut the smaller ribbon the same length, and glue the ruffled ribbon on the pleated ribbon right down the middle.

Ok...I cheated a teensy bit here. I used button shank removers to take the shanks off, but this isn't necessary. You could glue them down just fine or use your scissors to take the shanks off. Don't throw rocks at me!

Arrange your buttons on your cuff in a pleasing way, and glue them down.

To close the cuff, I cut two 2 inch lengths of matching satin ribbon and heat sealed the ends. I glued them on the back side of the cuff.

The Velcro part of it...it's really just measuring and guessing. I wrapped the cuff around my wrist and overlapped the ribbons, then a glued on the Velcro where the ribbons overlapped.

See? It didn't totally match up, but since I measured it against my wrist it worked out perfectly!

And I really love how it turned out! The gold buttons really gave it a more vintage-ish feel.

(Dude, my hair is cuh-raaaazy in this one!)

I seriously love it, I want to wear it with everything and I am typically not a bracelet person.

We still have one more day of the Jewelry Making for the Non-Jewelry Maker series! Though tomorrow...I cheat a little bit. :( There are a few easy to find jewelry supplies but I couldn't pass up the opportunity for some really simple jewelry.

I'll give you a hint. It's the necklace I'm wearing.